点击图片查看大图 ZY6235铺地材料辐射热通量试验装置
Material that lay the ground radiation heat flux test device
一、适用范围： Scope of application:
用小火焰点燃水平放置并暴露于倾斜的热辐射场中的铺地材料进行测试。适用于各种铺地材料。如：纺织地毯、软木板、木板、橡胶板和塑料地板及地板喷涂材料。该装置可以反应铺地材料包括使用的基材的燃烧性能，背衬材料、底层材料或者铺地材料其他方面的改变都可能影响试验结果，其用于测试和描述在试验室控制条件下，铺地材料对火成对热反应的燃烧特性。
With a small flame in horizontal and exposed to tilt the floor material for testing of thermal radiation field. Applicable to all kinds of floor materials. Such as: textile carpet, cork board, wood, rubber and plastic floor and floor coating materials. The device of the base material of floor materials including the use of the combustion performance, backing material, the underlying material or material that lay the ground other changes may affect the test result, it used to test and descript
二、符合标准： Conform to the standard:
GB/T11785《铺地材料燃烧的性能测定-辐射热源法》。
GB/T11785 "floor materials combustion performance measurement - radiation heat source method.
三、主要参数：The main parameters:
3.1最大使用功率：5KW；
3.2计时精度：<1s/h；
3.3热通量计测量范围：（0-15）Kw/m2；
3.4热通量计准确度：±0.2Kw/m2；
3.5热通量计精度：? <±3%；
3.6热辐射高温计量程：400-600℃，精度为±0.5℃；
3.7黑体温度误差：±5℃；
3.8排烟速度：(2.5±0.2)m/s；
3.9排烟能力：（39-85）m3/min；
3.10多孔耐火材料辐射板尺寸：300mm×450mm，能耐约900℃高温；
3.11热电偶：直径为3.2mm的K型不锈钢铠装热电偶； 曲线图
3.12燃烧喷灯：外径￠10mm内径￠6mm,喷灯管上打35个￠0.7mm孔；
3.13火焰高度：60～120mm可调；
3.14点火系统：高压电子点火；
3.15强力排风系统：本机装有强力排风扇，当试验完成后，启动排风扇系统将废气排出室外。
Maximum use of power: 3.1 kw;
3.2 timing accuracy: < 1 s/h;
3.3 heat flux meter measuring range: 0-15) Kw/m2;
3.4 heat flux meter accuracy: + / - 0.2 Kw/m2;
3.5 heat flux meter accuracy:? The < + / - 3%;
Thermal radiation pyrometer range 3.6:400-600 ℃, accuracy of plus or minus 0.5 ℃;
Error: 3.7 blackbody temperature + 5 ℃;
Exhaust speed 3.8 (2.5 + / - 0.2) m/s;
3.9 smoke exhaust ability: 39-85 m3 / min.
3.10 porous refractory radiant panel size: 300 mm * 450 mm, and can withstand temperatures up to about
Thermocouple 3.11:3.2 mm diameter stainless steel K armoured thermocouple; The graph
￠3.12 combustion burner: diameter 10 mm diameter 6 mm ￠, burner tube on 35 ￠0.7 mm hole;
Flame height 3.13:60 ~ 120 mm is adjustable;
3.14 the ignition system: high voltage electronic ignition;
3.15 strong exhaust system: the machine is equipped with powerful fan, when the test is finished, start the fan system will exhaust gas emitted.
四、设备结构：Equipment structure:
本机器结构由燃烧箱、控制箱两部份组成。
4.1燃烧箱尺寸：L1420*W1200*H2300（mm）
4.2控制箱/燃烧箱材质：采用优质不钢板，数控机床加工成型，圆弧造型美观大方。
4.3喷灯：由我公司自制，304不锈钢材料，完全符合GB/T11785标准要求。
4.4其它机械零件材质采用优质不锈钢或A3料加厚电镀，防腐防锈。
This machine structure is made up of combustion box, a control box sections.
Combustion box size: 4.1 W1200 L1420 * * H2300 (mm)
4.2 control box/combustion box material: is made of high qualified steel plate, the numerical control machine tool processing molding, arc the beauty is generous.
4.3 burner: made by my company, 304 stainless steel material, fully in line with the GB/T11785 standard requirements.
4.4 material is made of high quality stainless steel or other mechanical parts A3 material thickening plating, anticorrosion.
联系方式：东莞中诺（台湾）质检仪器设备有限公司
Contact: dongguan (Taiwan) quality inspection instrument equipment co., LTD
0769-89066618（转）815
13723549851（艾新华）
http://www.ajh007.com
http://www.zon007.com
http://zonskyszajh.bmlink
http://blog.sina.com.cn/u/3836926922
